Structure Features :
The mechanical seal adopts a single-end face, multiple springs, and a balanced cartridge structure. The end face load is uniform, the rotation direction is not limited, and the installation is convenient and reliable. The flushing scheme can adopt PLAN 11+ 61 (62).
Operating Range:
Mediums: Suitable for petroleum, chemical industry and liquefied petroleum gas, weak acid, alkali, salt and medium containing a small amount of particles.
Pressure: ≤2.5Mpa
Temperature: -40℃~220℃
Linear Speed: ≤20m/s
| Model | d1 | d2 | d3 | d4 | d5 | d6 | d7 | d8 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | L9 | L10 | L11 | L | N |
| LK0 | 18 | 22 | 35 | 36 | 51 | 70 | 90 | 109 | 121.3 | 15.3 | 5 | 60 | 40 | 23 | 23 | 5 | 19.5 | 59 | 50 | 4 | 13.5 |
| LK1 | 24 | 28 | 45 | 45 | 65 | 88 | 105 | 129 | 133.3 | 15.3 | 5 | 70 | 40 | 23 | 23 | 6 | 25.9 | 71 | 63 | 5 | 14 |
| LK2 | 32 | 38 | 55 | 55 | 75 | 105 | 125 | 149 | 140.3 | 15.3 | 5 | 78 | 40 | 23 | 23 | 8 | 35.4 | 78.5 | 63 | 5 | 14 |
| LK3 | 42 | 48 | 65 | 65 | 90 | 120 | 140 | 164 | 144.3 | 15.3 | 5 | 88 | 40 | 23 | 23 | 10 | 45.5 | 82 | 85 | 2 | 14 |
| LK4 | 48 | 58 | 80 | 81 | 105 | 140 | 165 | 194 | 150 | 20 | 6 | 92 | 43 | 23 | 23 | 12 | 51.3 | 80 | 85 | 7 | 18 |
| LK5 | 60 | 68 | 90 | 91 | 115 | 155 | 180 | 224 | 168 | 20 | 6 | 105 | 43 | 23 | 23 | 12 | 63.3 | 97 | 85 | 7 | 18 |
| LK6 | 75 | 82 | 110 | 111 | 135 | 170 | 200 | 249 | 178.3 | 20.3 | 6 | 117 | 43 | 23 | 23 | 16 | 79.3 | 107 | 87 | 9 | 22 |
A: We deliver customized sealing solutions to diverse industrial sectors,including:
·Oil and Gas
·Refining
·Chemical and Petrochemical
·Water and Wastewater Treatment
·Pharmaceutical
·Power Generation
·Marine
Our products are designed to perform reliably in demanding environments across multiple industries.
A: HQ Seals provides custom sealing solutions customized for your working conditions. We manufacture seals according to:
· Technical drawings
· Physical samples
· Special material & performance specifications
· Non-standard sizes
We maintain close communication with clients to guarantee all finished products satisfy operational and environmental requirements.
A: First, identify the optimal configuration (single or double seal) according to the process fluid. Then verify operating parameters — pressure, temperature and shaft speed — to select the appropriate seal type and materials. Lastly, confirm available installation dimensions, and opt for either a component or cartridge seal subject to customer requirements and relevant standards. Seal selection is normally carried out by qualified technicians.
A: For mechanical seals that have been stored for a long period: we can grind the rotating and stationary rings, replace secondary sealing O-rings, conduct air tightness testing and issue the pressure test report.
We can provide on-site installation guidance service. For failed mechanical seals, we are able to deliver failure analysis reports.
A: Yes, repairs are available. Depending on the damage condition of the mechanical seal, we classify the overhaul into Level 1, Level 2 and Level 3 repair.
EN
