Structure Features :
The mechanical seal adopts a single-end face and single spring. Unbalanced cartridge structure, the end-face load is uniform, the rotation direction is not limited, and the installation is convenient and reliable. The flushing scheme can adopt PLAN11 +61 (62).
Operating Range:
Mediums: oil, water, strong crystalline alkali, salt, highly soluble fluid slurry, organic solvents, and other weakly
corrosive solvents.
Pressure: ≤1Mpa
Temperature: -20℃~220℃
Linear Speed: ≤20m/s
| Model | d1 | d2 | d3 | d4 | d5 | d6 | d7 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | N |
| LK30 | 20 | 25 | 39 | 60 | - | 100 | 128 | 108 | 20 | 36 | 6 | 21.9 | 62 | 45 | 4 | 14 |
| LK40 | 30 | 35 | 51 | 74 | - | 115 | 140 | 116 | 20 | 40 | 8 | 33.3 | 65 | 48 | 5 | 14 |
| LK50 | 40 | 45 | 66 | 90 | - | 135 | 170 | 120 | 20 | 45 | 10 | 42.9 | 65 | 48 | 4 | 18 |
| LK50B | 40 | 45 | 66 | 90 | 110 | 150 | 180 | 125 | 20 | 44 | 10 | 42.9 | 70 | 53 | 4 | 14 |
| LK60 | 48 | 55 | 76 | 100 | 120 | 160 | 187 | 147 | 20 | 42 | 10 | 50.9 | 87 | 77.5 | 3 | 14 |
| LK70 | 60 | 68 | 91 | 120 | 145 | 180 | 215 | 146 | 30 | 49 | 12 | 62.9 | 87 | 59 | 3 | 18 |
| LK85 | 75 | 82 | 106 | 130 | 160 | 190 | 230 | 149 | 30 | 49 | 16 | 78.3 | 87 | 62 | 4 | 22 |
A: We deliver customized sealing solutions to diverse industrial sectors,including:
·Oil and Gas
·Refining
·Chemical and Petrochemical
·Water and Wastewater Treatment
·Pharmaceutical
·Power Generation
·Marine
Our products are designed to perform reliably in demanding environments across multiple industries.
A: HQ Seals provides custom sealing solutions customized for your working conditions. We manufacture seals according to:
· Technical drawings
· Physical samples
· Special material & performance specifications
· Non-standard sizes
We maintain close communication with clients to guarantee all finished products satisfy operational and environmental requirements.
A: First, identify the optimal configuration (single or double seal) according to the process fluid. Then verify operating parameters — pressure, temperature and shaft speed — to select the appropriate seal type and materials. Lastly, confirm available installation dimensions, and opt for either a component or cartridge seal subject to customer requirements and relevant standards. Seal selection is normally carried out by qualified technicians.
A: For mechanical seals that have been stored for a long period: we can grind the rotating and stationary rings, replace secondary sealing O-rings, conduct air tightness testing and issue the pressure test report.
We can provide on-site installation guidance service. For failed mechanical seals, we are able to deliver failure analysis reports.
A: Yes, repairs are available. Depending on the damage condition of the mechanical seal, we classify the overhaul into Level 1, Level 2 and Level 3 repair.
EN
